How to hide electrical cords on the floor?

Except for caves, there isn’t a single place where you wouldn’t find electrical cords and cables. These electrical cables are a part of life, and without them, there will be no electricity. However, while floor cable management is important, they pose several dangerous risks.

If they are exposed or damaged, they run a risk of fire hazard. Similarly, you can easily trip due to these wires because cable bundles can tangle up and clutter to make your trip on the floor. Therefore, hiding electrical cables lurking on the floor is important.

Over several decades, there has been an evolution in cable management systems, and new cable protector types have emerged. Let’s unveil the best cable covers and systems that hide cables and keep messy cords organized.


Why should you hide electrical cables?

Before identifying the best ways to hide or conceal electrical cords, you must know the deep-rooted intention to hide wires. According to one report, around 300 deaths and 4,000 injuries take place in the USA due to cable wires. The data is for US, and these numbers are increasingly high in developing countries like Pakistan and Bangladesh.

The fact mentioned above suffices the importance of hiding cables. Following are some other great reasons which advocate for hiding cables:

  • The wires that scatter and tangle around can increase the tripping hazards. It’s very common to see people tripping due to scattered wires. Therefore, installing cable protectors and hiding them will reduce this risk.
  • It’s also important to cover the messy wires. Extension cords, lamp cords, circuit breakers, and power strips consist of many wires that may be hazardous. If the wear and tear increase, they’ll be exposed, which can cause a fire hazard to people around them. They can even ignite a house on fire due to power surges or circuit faults.
  • If you’re carrying out a construction activity across a road and using heavy machines across it, it will be a good idea to install heavy-duty floor cable covers because vehicles crossing over them may destroy the cables.Since cables can be huge investments for some industrial factories, it’s important to protect them, or else; their destruction can potentially reduce operations and add a huge repair bill.

How to cover indoor electrical wires?

Look around your home and office, and you’ll realize you’re surrounded by tons of cables, wires, and cords. Circuit breaker, power strip, headphones, HDMI data cable, ethernet cable, optic fibre cable, and the list goes on. Plus, you’ll find your devices cables in your office or work area, including computer wires, flat screen cables, and printer wires.

Since there are so many cables, it becomes essential to keep them organized and make the most out of them. Following are several great ways to hide your indoor cables and protect them:

  • Floor cord covers/sidewinder cable protectors
  • Extension cord reel
  • Hiding behind drywalls

Floor Cord Covers

Floor cord covers are the most conventional and widely used cabling systems. They are generally made from reusable rubber or PVC plastic and are stable on any surface. One of the unique features of these cord covers is that you can cut them with utility knives up to your desired length. These are perfect for cabling all sorts of power strips, wall power, adaptors, and home electrical cords.

Plus, you can install them on your own. Gently fit all the wires in the rubber tabs and enclose them carefully. Fasten it using double-sided tape and place them on the desired spot.

Similarly, sidewinder cable protectors are another unique floor cover. They are extremely flexible and are made from ABS plastic. You can turn them and fit any corners of a specific room. Therefore, they can fit any room’s layout. Plus, they have segments that snap on to connect to each other, making configuration easy. Hence, they are an incredible solution to keep your chargers and other cables organized.

Hiding behind the walls

One of the easiest ways to get rid of these unsightly cords is simply hiding them behind the wall. It can work for wall-mounted TV cables in offices or homes. The process is simple, but for better office organization, it would be a good idea to get it done by an electrician.

Following is the process to hide your cables behind the wall:

  • First, remove your TV, CCTV camera, or any other appliance from the wall.
  • Find the enter and exit spot for the wires. The exit spot is preferred to be near the socket or power outlet.
  • Use a stud finder to find studs before drilling into the drywall.
  • Start drilling in the specified positions and fit the cables.
  • Push the cables and enclose them using screws.
  • Feed cables through the entry point and pull them from the exit point.

Now, you’ll have a great organized setup of your TV cables. Without any unsightly wires near you, you’ll be better able to enjoy your Netflix. Alternatively, another way to hide your wires is by using command hooks.

You can hide the ethernet cables, bulbs, and lamps cables behind the furniture. The process is simple. You just have to put the command hooks and fasten the entire wire around those hooks. In this way, the cables will be completely organized.


How to cover outdoor industrial cables?

The methods mentioned earlier are perfect for indoor cables. However, even large cables and cords are found in factories, workspaces, and warehouses. They are heavy fixed investments and protecting them is quite essential. Following are prominent ways that can protect them:

  • Heavy-duty cable guards
  • Hose ramps
  • Floor cable covers

You’ll find industrial power strips, coaxial cables, and heavy screen TV cables in your organization. Suppose you’re involved in outside construction work and have your machinery wires spread out. Vehicles running over your cords and destroying them is the most common risk you’ll face. Cable guards can cover your cables and act as speed bumps or ramps to withstand up to 20,000 kgs per axle.

Hose ramps are another prevalent cable protector in industries. Commonly seen in the fire department, they can cover the water hoses and protect them from vehicles. Since water hoses are a pretty expensive and important investment, covering them using hose ramps is essential.

Floor cable covers are another alternative to cable guards. Made from flexible rubber or plastic, they can withstand heavy loads and effectively protect wires.


Floor cable management systems

While cord covers and floor cable covers are quite prevalent cable protectors, there have been innovations in cable management systems. You can make changes in your infrastructure to hide cables underground and easily reconfigure them. All this is possible due to the following solutions:

  • Floor boxes
  • Raised floorings

Floor boxes involve installing all the wires underground and covering them with metal plates. Concealing the wires underground hides them completely and make the area trip-free. Plus, you can easily identify and solve any electrical problem by navigating to a floor box and checking it.

Raised floorings are another method that involves creating void spaces to hide wires. They are similar to floor boxes and can hide all the wires underground. Without any wire trace, your workplace is trip-free, and the wires are organized underground.

Alternatively, you can even use zip-ties or cable ties to fasten your cables and keep them organized. Since power outlets can also cause abrasion to wires, it’s a great idea to install home cable grommets, which are round rings inserted in the outlets.



Wires are essential, but they can pose several dangerous risks that may have serious repercussions. Therefore, hiding these electrical wires is imperative because the wires will not only be protected, the people around those wires will also be safe.

In your homes, factories, or offices, do you have irregular cabling and wiring? It’s time you hide them and keep them organized. Wondering where you can get high-quality wires that will last for a lifetime and keep your cabling intact?

Sino Concept is the place you must go. We provide several cable protection solutions to remove these unsightly cables and make your place wires-free. Visit our website to get quotes for our products.


Are you curious about us? Do you wonder what are our know-hows and where do we manufacture our products?

More about us
Cable protectors range by Sino Concept



Our company



Need any advice about our products? Do not hesitate to contact us, we will be happy to help.