What is a speed cushion?

A Speed cushion is a slightly raised driveway surface that is excessively used to calm traffic. The gaps between the rumbled bump allow the emergency vehicle to pass easily. They can be installed on city streets or urban roads where there is a high percentage of traffic and pedestrians.

Speed cushions can safely improve traffic safety without police enforcement, unlike other traffic speed control devices that require the presence of police.

These rubber speed management devices can be placed wherever required, and they can also be removed easily. Below is everything about speed cushions that one must know before installation.

Two red rubber speed cushions on the road for traffic-calming management.

Top FAQs about speed cushions!

Rubbber speed cushions are slightly raised bumps in the road that are used by the Department of Transportation for traffic speed reduction, similar to traffic cones, traffic signs, speed breakers, rumble strips, speed signs and red light signals.

These speed tables are installed by transportation engineers for pedestrian safety at high-traffic areas such as double lanes, road crossings, pedestrian crossings, traffic signals, roundabouts, parking lots, ramps, street parking, public works, etc.

The road bumps are sometimes made of rubber or recycled plastic. The reflective surface lets drivers easily see the pavement markings from a distance. The bumps in the road allow cyclists, motorists and emergency vehicles to pass easily. Given below are some of the most frequently asked questions related to speed tables.

Europe rubber speed cushions installed on the ground for traffic management.

How are speed cushions different from speed tables and speed humps?

Speed cushions have wheel cuts to allow emergency vehicles to pass easily without any difficulty. But they reduce the speed of cars and other small vehicles.

Bikes and cycles can also pass through these bumps without any difficulty. Moreover, the gaps between the bumps help drainage of excess water from city streets and roads.

Speed humps and speed tables are continuously bumped at every curb. They reduce the speed of all vehicles to a safe limit. This means that their presence will also affect vehicles of large sizes, such as ambulances and fire trucks.

A white car is passing a red speed cushion easily, a white truck is passing over a black and yellow speed table, and another white car is about to pass a rubber speed hump.

Are speed cushions effective in reducing speed?

Yes, speed cushions are very effective in reducing the speed of vehicles. They are one of the best traffic calming measures to control traffic in slow zone areas.

They are strategically installed using traffic engineering in high-traffic areas to slow down vehicles forcefully. Their effect depends on their geographical location. It is very useful in some countries where emergency vehicles are bigger than other vehicles.

However, speed cushions might not be very effective in countries where emergency vehicles are the same size as normal. But it still reduces the risk of road hazards.

    An arrow that points to the contact form

    You have already read a good part of this article, 👀
    We've
    got the impression that you like it. 🙂

      👇🏻

      If YOU ARE LOOKING FOR A SPEED CUSHION AND SPEED TABLE MANUFACTURER,
      FEEL FREE TO CONTACT US, WE ARE VERY HAPPY TO HELP!

      Let us contact you back!

      Name*

      Email*

      Phone

      Your message*

      Victorien Linkedin will be in charge of your request!

      Will it cause any damage to my car?

      No, speed cushions don’t cause any harm to the vehicles that move over them. They are very low in height, which is meant only to slow down traffic.

      Speed cushions are only installed for the safety of vehicles and pedestrians in the neighbourhood. They reduce the speed of the vehicles to a safe speed of around 25 mph.

      The drivers are informed about the presence of speed cushions beforehand through signboards. Therefore, they can control the vehicle’s speed before reaching the bump. If they fail to reduce their speed, they experience a slight jerk as the tyres hit the speed cushion. But this does not cause any harm.

      A black car is about to pass over a red rubber speed cushion, and a grey car is about to pass over a black and white asphalt speed cushion.

      Why is its use getting common, and what will it cost?

      Speed is the top reason for accidents in residential areas. City management is very much concerned about the safety of its residents. Therefore, they are excessively installing speed cushions on roads to avoid unfortunate events.

      The cost required for installing speed cushions depends on the road where you want to place them. Its cost also varies depending upon the material used for its manufacturing.

      Its placement cost ranges from low to high, depending on the width of the pathway. It will be much higher for broader roads than for narrower ones.

      Will it cause any delay in emergency situations?

      No, speed cushions cause no time delay in emergency events. They are designed to allow emergency vehicles to pass easily but force cars and other private vehicles to reduce their speed to a safe limit.

      When every second is precious in critical situations, the regular speed humps will cause resistance in the way of emergency vehicles. This delay can cause serious loss.

      But using speed cushions on busy streets and roads will cause the emergency vehicle to arrive on time. This is one of the most significant advantages of speed cushion over speed humps and tables.

      A bus is about to pass over a red speed cushion, and a fire truck is about to pass over three black speed cushions.

      Definition of a speed cushion

      Speed cushions are asphalt or rubber-shaped mounds that are slightly raised from the road’s surface to reduce speed. They are installed in high-traffic areas where vehicles have a higher chance of collision with pedestrians or other vehicles.

      They have wheel cuts between the bumps for the tyres of emergency vehicles. Thus allowing larger vehicles such as ambulances and fire trucks to cross them without delay in critical situations.

      But, other smaller vehicles with small axle widths are forced to lower their speed up to 25 miles per hour.

      The painted white lines that are visible from a distance warn the drivers to slow down their speed before reaching the speed cushion. If the driver does not reduce the vehicle’s speed, they get a sudden jerk as the tyres hit the speed cushion surface.

      Black and white asphalt speed cushions and a red rubber speed cushion for traffic safety management.

      Different names for speed cushions

      Speed cushion is used for managing the traffic flow near areas having high traffic, such as schools, hospitals, roundabouts, crosswalks, pedestrian crossings etc.

      They come in numerous varieties depending on the installation location and the material used for manufacturing.

      They are strategically designed by engineers a little above the road’s surface to safely reduce the speed of vehicles without causing any harm.

      It is also known for its other names, such as speed lump, speed pillow, sleeping policeman, road bump, traffic-management device, speed breaker, speed table, traffic control device, offset speed bump and judder bar, etc.

      A Europe style red rubber speed cushion manufactured by Sino Concept for traffic safety management.

      Why is a speed cushion better than installing a speed limit sign?

      A speed limit sign is a traffic signal that is placed on the urban pavement where the traffic volume is high, and the vehicles have a greater probability of hitting a pedestrian. But this kind of stop sign has a risk of being ignored by the drivers, which increases the chances of road hazards.

      Comparatively, speed cushions are a better option for managing traffic. They have gaps between road bumps, which allow emergency vehicles to pass easily in emergencies without wasting a second.

      Also, speed cushions forcefully reduce the speed of other vehicles with smaller widths as they cannot pass through the wheel cuts because of their dimensions.

      They are a safer way to control the traffic flow without causing any harm to the vehicle or driver.

      A Belgium-type speed cushion and a speed limit sign.

      Conclusion

      Speed cushions are road hurdles designed to slow down fast-moving vehicles on the roadway with high traffic, such as schools, crosswalks, cut-throughs, road intersections, ramps and sidewalks, etc. They have spaces between the bumps that allow the passing of emergency vehicles. Moreover, they help to drain water from the roadway.

      They come in a variety of options suitable for different locations. You can select one depending on your needs and budget.

      They are becoming more common than speed humps and tables as they have an intelligent design that strategically controls speeding traffic on urban roads. Also, they reduce the speed of the vehicle without causing any damage.

        👇🏻

        If YOU ARE LOOKING FOR A SPEED CUSHION AND SPEED TABLE MANUFACTURER,
        FEEL FREE TO CONTACT US, WE ARE VERY HAPPY TO HELP!

        Let us contact you back!

        Name*

        Email*

        Phone

        Your message*

        Victorien Linkedin will be in charge of your request!

         

        To learn more, we advise you to refer to the following pages:

        SPEED CUSHIONS AND SPEED TABLES

        WHO ARE WE?

        Are you curious about us? Do you wonder what are our know-hows and where do we manufacture our products?

        Discover below our know-how:

        Factory 1 - Rubber

        Best-selling products: Cable protectors, parking stops, speed bumps and cushions.

        Factory 2 - Metal

        Best-selling products: Crowd control barriers, cycle racks, steel bollards, and expanding barriers.

        Factory 3 - Plastic

        Best-selling products: Cable protector covers, traffic cones, roadworks beacons and posts.

        Our Factories

        LOCATIONS

        Sino Concept is a French-owned direct manufacturer with 3 factories in Qingdao, China.

        Sales offices in France, Germany, Finland, and headquarter is in Dubai.

        More about us

        Are you looking for a
        speed cushion and table manufacturer?

          Let us contact you back!

          Name*

          Email*

          Phone

          Your message*

          Victorien Linkedin will be in charge of your request!

          FOLLOW US ON LINKEDIN

          Company

          Our CEO

          CONTACT US

          If you have any questions, you can also email us at
          [email protected]

          Contact