What are parking wheel stop placement standards?

Wheel stops are among the most important road safety devices used to park cars in relatively limited areas of homes garages accurately, and professional parking lots. With their use, cars are safely parked as the wheels are blocked before they hit walls of the parking lot or other parked cars and avoid damage.

Generally, wheel stops are used in the parking areas, but it does not mean randomly placing them without knowing the standards to use them at any place.

There are basic standards and proper placement guidelines to get maximum benefit. So, whether it is your driveway, roadway, warehouse, or simply apartment parking zone, make sure to get these wheel stop standards before moving to any final step.

1-yellow-parking-wheel-stops

Where should wheel stops be placed?

Wheel stops are traffic management equipment used when cars, motor-vehicles, trucks, and other heavy traffic are a concern. These devices give confidence to the new drivers, teen drivers or even older people to safely drive and park at the parking space without impact to the property and nearby vehicles.

So, you can get an idea of the sites where wheel stops should be placed:

  • The first and foremost site is the residential areas that highly need wheel stops for pedestrians’ and drivers’ safety. Driving in your garage or driveway can sometimes be tricky, and you cannot guess when to stop. Losing control over the steering-wheel or failure to stop the car result in a collision that add cost to repair the vehicle plus the property revamp.
  • The front of the stores, plazas, restaurants or other markets have high traffic volume, and the customer parking is also close to the front window. People often cannot determine the exact point of stopping their cars and accidentally hitting the front windows. In such a case, using wheel stops between the storefront and the parking area can limit damage to a great extent.
  • You can also place wheel stops in parking spaces adjoining a public street. Typically, different types of drivers park their cars in the parking areas. Though most of them are highly experienced with driving skills but poor driving of some drunk drivers or new drivers can impact your vehicles. So, it’s wise to use wheel stops in the public parking zones.
  • Warehouses and factories are the next sites with high oncoming-traffic and using wheel stops at these locations saves vehicles and proves to be beneficial for pedestrians.
  • Wheel stops can also be used along fence lines to stop cars from overparking, protecting pedestrians from accidental collisions.

What should wheel stops be spacing?

Wheel stops should be placed at a reasonable distance not to block the entire passageway. Whether you want to install wheel stops in street parking, disabled parking, parallel parking or garage parking, don’t forget that successive wheel stops should be at least 3 feet apart. This spacing between adjacent wheel stops allows drivers to position their vehicles at the parking spot comfortably.

Similarly, you need to be very careful when planning parking structures and keep all-wheel stops equally spaced. For instance, if you provide a parking facility or paid parking, make sure wheel stops are placed at a distance to allow movement of the vehicle plus the driver. Keeping the distance between consecutive parking blocks restricts free movement, particularly in handicapped parking.

In addition to spacing in car parking, you must not forget the alignment of the wheel stops. Parking spots have perfectly aligned wheel stops as mismanaged wheel stops decreases parking space and make it difficult to park the motor vehicles.

Therefore, it is necessary to make accessible parking with signage, ramps and proper entrances to avoid car crashes and falling accidents of the pedestrians.

2-yellow-parking-wheel-stops

How far should a wheel stop be from a wall?

When it comes to wheel stops from the wall, remember it depends on the parking direction. As there are front-in and rear directions of parking sites, so is their distance to the wall.

When the reverse-in parking is likely, and the encroachment over the end of the parking space is not desired, the wheel stops should be positioned at the rear in position, and all vehicles are required to back in.

Therefore, front-in parking sites should have a distance of about 2.5 feet from parking to the wall. At the same time, keep 3.5 feet wheel stop distance for the rear-in parking side.

This space keeps the vehicles and property at an ideal distance to avoid accidents.

What is the correct wheel stop distance from the kerb?

Again, the correct wheel stop distance from the kerb varies for both front and back-in parking. When the parking to the kerb is less than 150 mm high, the distance for front-in parking should be 2 feet, and for back-in parking, it should be around 3 feet.

Thus, it entirely depends on the parking regulations and parking enforcement that make the city parking structure easy for the users.

The parking management or parking authority has the right to decide a plan for oversized or small parking areas to utilize maximum space.

Sometimes people don’t understand markings for long term parking zones and go without any solid plan resulting in no more space after a few vehicles.

3-parking-wheel-stop

Are wheel stops permanently placed?

Wheel stops give permanent or temporary parking options in downtown parking garages, public parking areas, visitors parking sites and free parking spaces. The use of wheel stops entirely depends on your need, and you can benefit from their permanent fixtures or temporary placement.

If it is your personal property where several cars are daily parked, and you want to use the car parking space skillfully, you must go for permanent installation of the wheel stops. You can design a parking layout in such a way as to allocate specific space for different vehicles as per their size using wheel stops. On the other hand, making parking areas for the short term is also possible with wheel stops that would otherwise be inconvenient and hazardous to pedestrians.

There are simple installation plugs and screws with the wheel stop kits, and you can fix them on asphalt or concrete surfaces. When the job is done, and you no longer need them, just unscrew the set-up and take them off. Just give your wheel stops a bit round of cleaning and keep them at a safe place to be used at any other site.

Thus, make the parking spaces available for everyone and ensure the safety of vehicles, property and pedestrians.

Conclusion

Wheel stops are a great way to make the parking zones user-friendly, but the concern is to use parking blocks the right way. Using wheel stops at wrong places confuses drivers and makes it hard for vehicles to enter and exit parking zone. Above all, buildings and other vehicles can be protected with the correct placement of wheel stops because they also guide and assist drivers in driving cautiously.

Thus, make sure to have a parking permit and give users parking facilities in off-street parking spaces, public parking garages, residential parking, employee parking, or city parking garage. When parking and transportation are safe, there will be no risk of car crashes and accidents of motorists, bicyclists, and other heavy duty vehicles.

WHO ARE WE?

Are you curious about us? Do you wonder what are our know-hows and where do we manufacture our products?

More about us

WHEEL STOPS & PARKING BLOCKS

FOLLOW US ON LINKEDIN

Our company

Our CEO

CONTACT US

Need any advice about our products? Do not hesitate to contact us, we will be happy to help.

Contact