Top 5 benefits of speed bumps

Speed bumps are traffic control devices that are placed on the road. This tool has been used all over the world to help traffic management systems reduce and slow down speeding in order to comply with appropriate regulatory requirements.

The usage of “sleeping policeman,” another euphemism for speed bumps, helps other speed-reduction vertical signs work more effectively.

The speed bump is typically constructed of concrete, asphalt, plastic or rubber. It is installed slightly above the asphalt surface. Rubber speed bumps are becoming increasingly popular due to their portability and ease of movement.

The maximum height of this instrument is 100mm, according to UK regulations. It can’t possibly be any higher. As a result, the vehicle may easily lower its speed to 5 miles per hour.

This speed bump is frequently encountered on private roadways, alleys and parking lots. However, its usage on a number of UK roadways frequently draws criticism since it is seen to inflict a great deal of injury to road users and car damage.

This is usually due to an unsightly bump design, such as a too-sharp angle or a too-high hump. Speed bumps provide numerous advantages if everything is done correctly and following the rules.

Do you want to know more about this topic? We also have an article talking about the role of speed bumps.

Speed bump made of vulcanized rubber with anti-slip arrows design and can be embedded with cat-eye reflectors

Discover below our full range of Speed Bumps and Speed Humps!

Speed bumps as speed limit controllers

The primary benefit of speedbumps is that they help regulate the speed of cars travelling through a certain section of the road.

Vehicle speed frequently exceeds the legal limit. Speed limit signs and line markings, as well as traffic cones, aren’t seen to be the best way to deal with this. Many drivers break the law on purpose, claiming that they are in a rush and also the impact of low-level police enforcement.

However, what they do has the potential to harm others as well as themselves. To avoid accidents and damage, speed bumps are used to curb vehicle speed.

Vehicle accidents are usually caused by a driver’s inability to control his vehicle’s speed so that it does not collide with anything in front of it, such as property, other cars, animals, or pedestrians.

Speed bumps are designed to reduce these sorts of losses, particularly in high-risk areas like schools, work zones and residential areas.

A pair of black and yellow speed bumps on the road to reduce speed.

Speed bumps as speed controllers for drivers’ and pedestrians’ safety

Benefits of Speed Bumps for the driver:

  • Reduce the likelihood of an accident.
  • Minimizing the risk of material loss as a result of property and vehicle breakage.
  • Encouraging more compliance with traffic signals, namely speed signs, parking signs and stop signs.

An arrow that points to the contact form

You have already read a good part of this article, 👀
We've
got the impression that you like it. 🙂

👇🏻

IF YOU ARE LOOKING TO WORK DIRECTLY WITH A MANUFACTURER,
FEEL FREE TO CONTACT US. WE ARE VERY HAPPY TO HELP!

    Let us contact you back!

    Name*

    Email*

    Phone

    Your message*

    Benefits of Speed Bumps for pedestrians and bicyclists:

    • Because there are no longer high-speed cars going by, there is no need to be highly concerned when walking and riding your bike on the sidewalk or crossing the crosswalk.
    • Reduce the chance of collision and accommodate pedestrian safety.

    Speed bumps as traffic controllers

    In the UK, many people deliberately avoid traffic full of speed bumps. This mound is seen to be a potential stumbling block. Therefore, traffic is diverted to alternate routes.

    This has a good effect on the neighbourhood. Avoid the path of the road that has a high volume of traffic. For example, if the road in the school zone has some speed bumps, then drivers are more likely to choose a different driveway rather than go through a road that is inconvenient for them.

    Thus, this road will be quiet from passing vehicles, which can also significantly create calm traffic and a slow zone.

    Reducing traffic noise will provide a suitable and uninterrupted learning environment, as well as protect students from the dangers of accidents. Furthermore, the pavement becomes more pleasant for cyclists and pedestrians.

    If the route being traversed provides a cut-through to a destination, adding additional speed bumps will help alleviate traffic congestion caused by a large number of cars.

    A black and yellow speed bump used for traffic-calming purposes.

    Speed bumps for traffic calming control

    With the growing number of cars in both urban and rural regions, the usage of Speed Bump has become more prevalent, particularly at intersections and pedestrian crossings.

    Many cars seek to pass one other and refuse to yield the right of way, resulting in traffic bottlenecks. At the same time, the intersection is a legal crosswalk to allow a pedestrian. This is one of the benefits of Speed bumps: to control the driver to slow down and pay more attention to signage.

    These speed bumps remind the motorist that he or she must be prepared for the traffic conditions ahead – forcing the driver to slow down and become more cautious. Because no single vehicle dominates the others, this configuration helps to preserve a feeling of equilibrium among fellow road users.

    No pedestrians and bicyclists were discomforted as a result of the congested vehicles. Additionally, this will improve general road traffic safety.

    A black and yellow traffic calming bump to reduce speed.

    Speed bumps as a regulator of the parking area

    In parking lots, speed bumps have become a highly useful tool. Slower traffic is required in parking lots, regardless of how large or small the parking space is. If your company has a parking lot, this technology should be considered.

    According to traffic data in the UK, lowering the speed limit to 25 Mph can reduce serious injury accidents by up to 95% in that neighbourhood. Several speed breakers will be required at the parking spot. The speed limit is self-enforcing through road bumps.

    In addition, speed bumps also function to minimize the number of vehicle-to-vehicle accidents and vehicle-to-pedestrian collisions, which often occur in parking lots. According to the survey, vehicles striking pedestrians occurred 22 per cent of the time in the parking space.

    This generally happens when the traffic volume in the parking garage is too high. Heavy queues of vehicles entering and exiting parking lots, as well as tight and steep geometric designs, especially for large and long vehicles such as buses, might lead to more collisions. The speed bumps are back in action at this point.

    A road bump of black and yellow on the road to reduce speed.

    Speed bumps as a saviour during the slippery winter

    Winter is one of the most challenging times for nations with four seasons, such as those in Europe and the United Kingdom. When winter arrives, the roads will be coated with ice and become dangerously slick. Nowadays, speed bumps are required to be present at all times to assist drivers.

    Even with adequate control, slippery surfaces will cause tires to skid. Speed bumps prevent tires from slipping too far off the road. Because if this occurs, it will lead to accidents that involve fatalities and may possibly result in death.

    For this condition, speed bumps made of portable rubber are preferred. After the winter is over, this tool can be removed and moved to another place so it doesn’t interfere with traffic flow.

    A black and yellow speed bump on a snowy road.

    Conclusion

    Those are some of the benefits of using speed bumps on the roads and parking areas. Although it often draws criticism because of some of its disadvantages, now, these speed bumps are still very much needed.

    As long as it is installed correctly and in accordance with the provisions, its existence will not pose a danger. On the contrary, they will bring benefits to everyone, including motorists, pedestrians, property owners and living creatures around them.

    The selection of materials and the right location are also indicators of the successful installation of speed bumps.

    👇🏻

    IF YOU ARE LOOKING TO WORK DIRECTLY WITH A MANUFACTURER,
    FEEL FREE TO CONTACT US. WE ARE VERY HAPPY TO HELP!

      Let us contact you back!

      Name*

      Email*

      Phone

      Your message*

      To learn more, we advise you to refer to the following pages: