Will parking blocks damage vehicles?
“Will parking blocks damage vehicles?” This is a puzzling question. Is it not so? Although most people may know about parking bumpers, they will not be familiar with their usage and damage.
In this blog, you will see the negative impacts of parking bumpers and how you can convert their negative aspects into positive ones. So, let’s start to know how these tiny barriers work!
Most sideways are about 6″ above the adjacent pavement. For driveways, this can reduce vehicular trespass into the walker area. And when water flows during the rainy season, the height difference prevents water from existing on the pavement.
Wheel stops in the parking space also do the same job. The role of parking blocks is to keep oncoming vehicles parking safely where a high volume of pedestrians moves.
Likewise, it is vital in traffic control management and maintaining parking lots. However, they can damage your car as well if you drive carelessly.
Reasons to install these parking blocks
You may see many traffic safety products such as speed cushions, speed bumps, parking curbs, lane dividers, wheel chocks, etc. Remember, everything that you see around has some purpose.
Parking curbs, especially rubber wheel stops, are now significant, and everyone should be aware of their importance and uses.
Listed below are reasons to install this safety tool in parking spaces.
- From avoiding property damage to protecting the drivers, the wheel stop plays a vital role.
- Wheel stops can control curb overhang that is potentially hazardous to pedestrians. Pedestrians will be able to pass by because of the stops.
- These can help prevent vehicles from colliding while parked by preventing encroachment into an adjacent parking place.
- They avoid contact with end barriers such as high curbs.
Do parking blocks harm cars?
Wheel stops provide a practical and effective means of preventing vehicle overhangs from reducing the apparent width of accessible routes (e.g., sidewalks).
It covers parking zones and access aisles. The report recommends that parking spaces be designed so that cars and vans don’t obstruct accessible routes when parked. Local zoning ordinances also mandated wheel stops.
The primary purpose of the parking bumper is to stop the car from moving forward and prevent drivers from collisions.
However, sometimes, it can cause car accidents because the vehicle owner is distracted while driving or forgets to put on the brakes. Their minor negligence can damage nearby cyclists, motorists, and landscapes.
Parking blocks and new car designs
Nowadays, the world is making much progress because of technology. Thanks to technology have brought an immense change in our life.
Most of today’s cars are designed in such a way that they are more attractive and more sensitive than previous ones. They usually consist of the lower front fascia and grill area. Behind the grill, air conditioning condensers and radiator are placed.
In some other models, louvres are placed behind the grill. Air can move quickly between different parts of cars, and engines can perform well.
These sections are made entirely of plastic and do not match the concrete slabs. Once they get damaged, it might cost thousands of dollars to recover. You can better estimate how significant a loss can occur due to your little carelessness.
So, you should take your time to park correctly and enter the parking area with caution. For instance, if you hit one of these curbs or even a pothole, it’s better to inspect your car immediately or report it to the service counter when you’re in for service.
The replacement may be required if there are cracks or substantial damage. If your car is slightly cracked, take it to a repair shop.
Are parking blocks hazardous for pedestrians?
Wheel stops may cause many trips and falls by pedestrians in parking zones. It is the only disadvantage of parking bumper that mainly walker faces. They can get severe injuries or suffer orthopaedic diseases due to these bumpers.
But remember, every problem has its solution. You can overcome these hazards if you consider the following things in mind.
- Use rubber parking bumpers instead of plastic or concrete parking curbs.
- The distance between adjacent wheel stops should be 3 feet.
- Parking blocks should be marked or painted clearly in traffic parking rows.
- Inspect wheel regularly stops to ensure they are conspicuous and free of weeds, debris, or snow.
- While placing wheel stops, ensure they do not extend between vehicles’ front ends or span painted lines between parking spaces.
- Keep the parking bumper in good condition and fix it so they cannot move quickly.
- Wheel stops should adjust so the front bumper does not extend over the sidewalk when a parked vehicle faces a sidewalk area.
Different colours of parking blocks
Wheel stops come in different colours and sizes. It depends on the traffic conditions and parking requirements. You should select a parking bumper with a reflective film so anyone can observe it, even from a distant place.
Look at the wheel stops’ colours and determine the most appropriate for every situation.
- Yellow and black
- White and black
- Blue and white
Grey-coloured parking bumpers consist of cement material. One of their disadvantages is that they are only available in one colour. If you implement it on the ground with the same colour, no one can differentiate these blocks, and trip and fall accidents occur.
Yellow and black parking bumpers are ideal for every type of parking lot. They are made from premium rubber material with yellow reflective stripes to increase nighttime visibility.
They have a honeycomb bottom to contour to uneven surfaces and are slightly lighter, so you can handle them by hand instead of by machine.
White and black are also used in the various parking zones. These blocks are not very visible compared to yellow and black rubber blocks.
You cannot install it in your garage if your floor has a similar colour. Furthermore, they are also made from recycled rubber and serve the same role.
Accessible parking spaces are usually marked with blue and white parking bumpers. These distinct colours allow disabled parking spaces to differentiate easily from pedestrians and vehicles.
Wherever you see blue blocks, it means that parking lots are saved for handicapped vehicles.
Wheel stops are discussed in the professional literature. Some offer tips on using wheel stops appropriately, while others address how to design wheel stops out of the equation entirely. According to the source, wheel stops are prohibited in pedestrian walkways or foreseeable pedestrian paths.
If wheel stops are present, they should paint to contrast with their surroundings and all other painted markers on the parking surface to lessen the likelihood of trips.
A rubber parking bumper can significantly reduce the risk of the above-mentioned problems. You can rely on them for the safety and security of your car and parking spot.
To learn more, we advise you to refer to the following pages: