Facts about floor cable management!

In movies or in real life, you must have witnessed heavy cables bundled up lying in the backroom of factories. They are mostly found in big organizations or IT offices where those big cables are responsible for connections across the workstations.

However, such cables can pose a danger. Firstly, they can get tangled and become a favourite place for termites to hide who can chew off the electrical wirings, causing electrical hazards to humans. Quite recently, many organizations are beginning to realize the importance of cable floor management.

We have an article to explain everything about cable protectors. Cable management solutions are an efficient way to hide cables and protect wires as well as humans. However, there can be too many cables protector types to choose from. Brace yourself because following, you’ll learn about the best cable protector measures and ways to hide them.

1-floor-cable-management

How to hide electrical cords on the floor?

Look around your house or office; you’ll find so many wirings scattered around. Extension cords, audio cables, speaker cables, coaxial cables, TV cables, chargers, HDMI data cables, and the list goes on. These cords require protection because they can tangle up and cause tripping hazards, leading to fatal damages.

Cable management systems have evolved over the years to cater to new types of wiring and cabling specifications. Therefore, there are so many measures to hide electrical wires and cords on the floor. Some of the major solutions to hide and protect electrical cords on the floor are as follows:

1. Floor cord covers

These are the most prominent and useful solutions for hiding cords. They are an incredible cord organizer because they seamlessly hide the cords and organize them in a tidy manner. Plus, the installation process is simple, and you can do it yourself. These cords are self-adhesive, and you can cut them with knives to your desired length. Simply pick up the cord and secure it between the rubber tabs of cord covers. Use double-sided tape to conceal the wires completely. Your extension cords, power cords, wall-mounted tv cables, and charging station will hide behind these cords and will eliminate the tripping hazard completely. Plus, they can be made from rubber or PVC/polyurethane plastic, which can withstand heavy weight.

2. Floor Boxes

You must have seen cable bundles in IT offices that are installed underground. There are no wires around, and all of them run under the floor. Such a system of installing wires makes use of floor boxes. Floor boxes are an efficient solution because they keep the messy wires organized underground. Since there are no wires, you won’t have to worry about tripping. However, you require an electrician to install them and organize all the cables neatly.Furthermore, these floor boxes allow easy configuration with the cables. They have a hook opening which allows you to access the cables. So, if there are power surges, you can easily identify the places where it ought to happen.

3. Sidewinder cable Protectors

This is another innovative design in cable management because sidewinders can change shapes according to the room’s layout. The installation is also quite simple and similar to floor cord covers. They are useful in workstations, warehouses, homes, and offices because you can secure the wires and small cords in an organized way. If you have wires that turn corners, sidewinders cable protectors enable you to secure them without disrupting the flow.They are also easy to configure. These are usually in segments, and you can snap on the segments to increase the size. Plus, you can reconfigure easily by identifying the segment which is causing the problem. Sometimes, the plugs and switches can also harm wires through power surges. Using a cable home grommet can secure these plugs because they are rings inserted into the panel, protecting them from abrasion.

Therefore, using a mix of potential solutions can secure your place perfectly.

2-cable-management-devices

How to prevent cable-related dangers

The above-mentioned are the fatal dangers that can arise due to cables. However, even if you install cable protectors, you need to be careful and get them installed by a professional. Some of the ways in which you can avoid cable dangers will be discussed further.

Firstly, you should not overfill cable management devices in floor boxes or floorings because they run a risk of damaging the insulation of your cables. Therefore, use cables according to the capacity. Secondly, cable ties are a great way to tie a cable bundle and keep them organized. However, over-tightening them may cause damage to cable insulations. Plus, the connectivity signals can reduce and distort the channels.

Sometimes, you can even over-bend the cables using sidewinders cable protectors. However, overbending them further than their cable bend radius may cause permanent damage to the cables. They may wear out and get exposed, posing risks of electrocution.

These are the things you should keep in mind when installing cable management systems. Also, improve your sockets protection because power surges may cause permanent damages to your connected devices.

Acknowledging these important things while also installing the cable measures discussed above will ensure seamless cable concealment.

What are cable-related dangers?

Cable-related dangers are quite fatal because they may even lead to death. Exposed wires and clutter of cables increase the risks for damages. Suppose you accidentally touch an exposed wire with a current flowing; there’s a high probability that you’ll feel a zap. The people who can get affected by cables are as follows:

  • Children and pets
  • Employees
  • Guests

Many children naturally tend to take everything they see in their mouths. However, this could be dangerous. Suppose your kid is sitting next to the home cables, plugs, or chargers; they can experience a burn or zap if they take it in their mouth. Similarly, pets, especially dogs, may sniff or nibble these wires, posing similar risks to children.

There tends to be a lot of wiring in industrial settings and offices, including flat-screen TV cables, ethernet cables, fiber-optic cables, and computers wires. They can tangle up, wear out, and even pose great dangers if they are not organized.

Cable dangers may also compromise guests. Suppose you have broken bulb wirings, desks lamps, weary wires, and disrupted power cords. If guests touch them unknowingly, they can feel the awful current flowing into them. Therefore, cable management becomes essential at organizing these cables.

3-cable-related-danger

Top measures to protect floor cables

The methods discussed above were more suitable to protect cables in indoor settings. However, there can be cables on roads, streets, factories, and big warehouses. You can also find them in big industrial factories where cable management is essential to increase business efficiency because they have massive cabling to secure tons of data.

Some of the measures that are more suitable for industrial and outdoor settings include:

  • Heavy-duty cable guards
  • Raised floorings
  • Hose ramps and floor cable covers

Cable guards are huge cable protectors with multiple channel options to secure cables and wires across a place with a high footfall of pedestrians and heavy-duty vehicles mobility. Suppose a warehouse with some huge forklifts and lorries that have the potential to damage these cables. Using cable guards in these places will be beneficial because they have tremendous strength to withstand up to 20,000 kg per axle. Hence, they are even suitable as speed bumps or ramps on roads because they can counter them.

Secondly, raised floorings are an innovative solution because they involve raising a floor to create a void for hiding the wires. It’s suitable in heavy industrial setups with a lot of machines because they can conceal the wires completely underground and eliminate tripping hazards.

Plus, hose ramps and floor cable covers are also suitable for protecting hoses, industrial cables, and power strips. They are also extendable because you can use interlocking connectors and nylon cable ties to increase the series. Alternatively, you can use hooks or Velcro for hook-and-loop scalability. These cable covers also have a high density to withstand heavy loads.

4-cable-protection-measures

Conclusion

Having discussed the risks of not having cable protectors and the immense benefits they provide, you must invest in planning for a security system for your house, business, or factory. Suppose your cables get worsen over time and wear out. There’s a high risk that they can cause a fire which may eradicate all the structures you build over your lifetime.

Do you want that to happen? Of course, you don’t want to. If you want to improve cable management systems in your surrounding environment, Sino Concept is the place to go.

We are one of the leading experts in cable management systems and have a wide variety of solutions. Visit our website to learn more about our products.

WHO ARE WE?

Are you curious about us? Do you wonder what are our know-hows and where do we manufacture our products?

More about us
Cable protectors range by Sino Concept

CABLE PROTECTORS & CABLE COVERS

FOLLOW US ON LINKEDIN

Our company

Our CEO

CONTACT US

Need any advice about our products? Do not hesitate to contact us, we will be happy to help.

Contact